SN042 pulse Screwdriver / In Line Type, Non Shut-Off Type
- X-Shape Sealing improves repeatability and durability.
- Twin drive roller blades reduce noise, vibration and improves impulse efficiency.
- 1 Piece design front end plate and cylinder improves motor efficiency.
- Double chamber air motor
9 Vanes motor design for smallest dimensions with highest power and acceleration results in a short time to reach the set torque and highest The required torque can be easily productivity.
- One hand reverse operation for Right or Left handed operators.
- Low noise exhaust, 360º adjustable.
- Easy Torque Adjustment
The required torque can be easily adjusted by turning the adjust screw through the housing.
- Hex Drive: 1/4″ HEX
- Bolt Capacity: M5~M8
- Measured on Hard Joint
Min. Oil Pressure / 0.4MPa: 7(5.2) Nm(Lb-ft)
Min. Oil Pressure / 0.5MPa: 9(6.6) Nm(Lb-ft)
Min. Oil Pressure / 0.6MPa: 11(8.1) Nm(Lb-ft)
Max. Oil Pressure / 0.4MPa: 10(7.4) Nm(Lb-ft)
Max. Oil Pressure / 0.5MPa: 12(8.9) Nm(Lb-ft)
Max. Oil Pressure / 0.6MPa: 14(10.3) Nm(Lb-ft)
- Free Speed: 5600 rpm
- Air Cons.: 0.4 m3/min
- Noise Level: 80 dB(A)
- Net Weight: 0.87 kg
- Air Inlet Size: NPT 1/4″
- Recommended Gauge Air Pressure: 60~90psi(4kg/cm²~6kg/cm² )(0.4Mpa~0.6Mpa)
- Air Hose Size: 10mm x 6.5mm (for 042~062 model ), (for 072 model)
- Above DATA Are All Measured At 4kg/cm²~6kg/cm² Gauge Air Pressure