Air Sander and Polisher
Air Sander and Polisher is a compressed-air finishing tool line covering orbital, belt, gear-driven and angle sanders alongside random-orbital and rotary polishers, for material removal and surface finishing on metal, wood, composite and painted surfaces. Free speeds across the line run from 900 to 18,000 RPM depending on…
Read the full description ↓
The ZBS-382N1 steps up to a narrower, longer 6x457mm belt on a steel wheel, at 2.86 lb (1.3 kg) and 15.35 inches…
View details
The ZBS-382N3 widens the belt to 13mm on the same 457mm length as the ZBS-382N1, at a lighter 2.07 lb (0.94 kg)…
View details
The ZBS-382N4 carries the longest belt in the 382 series, 13x610mm, in the longest body too at 17.72 inches (450mm) and 2.18…
View details
The ZBS-382N5 puts the same 13mm belt width as the ZBS-382N4 on a shorter 330mm belt and 326mm body -- 1.98 lb…
View details
The ZBS-382N6 runs the widest belt in the 382 series at 15mm, 475mm long, at 1.98 lb (0.9 kg) and 15.35 inches…
View details
The ZBS-382N7 pairs the same 475mm belt length as the ZBS-382N6 with a narrower 8mm width, at 2.86 lb (1.3 kg) --…
View details
The ZBS-383 runs a 20x520mm belt on a rubber contact wheel at 17,000 RPM, in a 16.02-inch (407mm), 2.93 lb (1.33 kg)…
View details
The ZBS-383A carries the same 20x520mm belt, rubber wheel, 17,000 RPM and 2.93 lb (1.33 kg), 16.02-inch (407mm) body as the ZBS-383…
View details
The ZBS-383A1 carries the same 20x520mm, rubber-wheel, 2.93 lb (1.33 kg) specification as the ZBS-383 and ZBS-383A -- another model number in…
View details
The ZBS-383A2 completes the rubber-wheel, 20x520mm, 2.93 lb (1.33 kg) spec class alongside the ZBS-383, ZBS-383A and ZBS-383A1.
View details
The ZBS-383N is the steel-wheel version of the ZBS-383: the same 20x520mm belt, 17,000 RPM, 2.93 lb (1.33 kg) and 16.02-inch (407mm)…
View details
The ZBS-383N1 keeps the 383 series' 20mm belt width but shortens it to 330mm on a steel wheel, dropping to 1.98 lb…
View detailsAbout air sander and polisher
Air Sander and Polisher is a compressed-air finishing tool line covering orbital, belt, gear-driven and angle sanders alongside random-orbital and rotary polishers, for material removal and surface finishing on metal, wood, composite and painted surfaces. Free speeds across the line run from 900 to 18,000 RPM depending on the tool type, with pad, orbit and belt sizes ranging from a 1-1/4″ (32mm) detail pad up to an 8″ (200mm) gear-driven disc and belts up to 40mm wide.
Browse by tool type below – orbital and jitterbug sanders for fine finishing, belt sanders for fast material removal, gear-driven and angle sanders for heavy-duty work, and polishers for final surface refinement.