Air Sander and Polisher
Air Sander and Polisher is a compressed-air finishing tool line covering orbital, belt, gear-driven and angle sanders alongside random-orbital and rotary polishers, for material removal and surface finishing on metal, wood, composite and painted surfaces. Free speeds across the line run from 900 to 18,000 RPM depending on…
Read the full description ↓
The ZBS-383N2 matches the ZBS-383N's 20x520mm belt and 16.02-inch (407mm) steel-wheel body, at a lighter 2.18 lb (0.99 kg).
View details
The ZBS-385A steps up to the 385 series: a 30x540mm belt on a rubber wheel at 13,000 RPM, 3.3 lb (1.5 kg),…
View details
The ZBS-385A1 carries the 385 series' 13,000 RPM drive and 415mm body but narrows to a 20x520mm belt -- the 383 series'…
View details
The ZBS-385N is the steel-wheel version of the ZBS-385A: the same 30x540mm belt, 13,000 RPM and 3.3 lb (1.5 kg) weight, with…
View details
The ZBS-385Z2A matches the ZBS-385A1's 20x520mm rubber-wheel spec on the same 385-series body -- the Z2 designation among this series' 20mm-belt options.
View details
The ZBS-385Z2N is the steel-wheel counterpart to the ZBS-385Z2A: the same 20x520mm belt and 385-series body, with a steel wheel.
View details
The ZBS-385Z3A returns to the 30x540mm belt of the ZBS-385A on a rubber wheel -- the Z3 designation among the 385 series'…
View details
The ZBS-385Z3N is the steel-wheel version of the ZBS-385Z3A: 30x540mm belt, 13,000 RPM, 3.3 lb (1.5 kg) -- the steel-wheel option for…
View details
The ZBS-3892 runs a 20x640mm belt -- longer than any 385-series belt -- on a steel wheel at 13,000 RPM, 3.3 lb…
View details
The ZBS-3893A widens the ZBS-3892's 640mm belt to 30mm on a rubber wheel, at the same 13,000 RPM and 3.3 lb (1.5…
View details
The ZBS-3893G carries the longest belt so far, 30x760mm, but runs at just 3,300 RPM -- a quarter of the ZBS-3893A's speed…
View details
The ZBS-3894 is the widest belt in the range at 40mm, 750mm long, on a rubber wheel at 13,000 RPM -- the…
View detailsAbout air sander and polisher
Air Sander and Polisher is a compressed-air finishing tool line covering orbital, belt, gear-driven and angle sanders alongside random-orbital and rotary polishers, for material removal and surface finishing on metal, wood, composite and painted surfaces. Free speeds across the line run from 900 to 18,000 RPM depending on the tool type, with pad, orbit and belt sizes ranging from a 1-1/4″ (32mm) detail pad up to an 8″ (200mm) gear-driven disc and belts up to 40mm wide.
Browse by tool type below – orbital and jitterbug sanders for fine finishing, belt sanders for fast material removal, gear-driven and angle sanders for heavy-duty work, and polishers for final surface refinement.